Stabilizer Link 11663979-00 For BYD Han EV | VYNX Factory

information

Technical Description

A stabilizer link is a small component with an important role in front suspension geometry. It transfers movement between the anti-roll bar and the suspension assembly, allowing the bar to resist excessive differences in wheel movement during cornering. When the link develops joint wear or looseness, the vehicle may exhibit knocking noises over bumps, reduced suspension stability, or increased body movement.

The 11663979-00 design is catalogued as a steel stabilizer link with articulated joint ends. The joint structure accommodates suspension movement while maintaining the connection between the anti-roll bar and its mounting point. Protective boots help shield the joint areas from road dirt and moisture; their condition is important for long-term service performance.

Reference catalogues list a nominal overall length of approximately 260 mm and M12 × 1.25 thread specifications for this OE family. These figures should be treated as reference data rather than a substitute for checking the actual sample, particularly when purchasing for different BYD vehicle generations.

For replacement-parts wholesalers, consistent dimensions, thread compatibility, joint movement, and boot protection are key points to verify during product evaluation. A correct match helps avoid installation issues and unnecessary returns. As a China-based auto parts supplier, the factory supports OE-number-based identification and wholesale enquiries for stabilizer links across selected BYD applications.

Compatible Vehicles

Catalogues associate OE 11663979-00 and its related references with selected versions of the following BYD models:

• BYD Han / Han EV

• BYD Tang / Tang EV

• BYD Dolphin

• BYD Yuan Plus / Atto 3

• Selected BYD Qin Plus applications

Compatibility may vary by production year, powertrain, and suspension configuration. Always verify the OE number before confirming an order.

Cross-Reference Numbers

• SEH-2906100

• SC2EM-2906020

• 13457771-00

• 13785103-00

• MRHB-2906020

• 14302381-00

• 16100803-00

• 16420555-00

Cross-reference numbers are catalogue references and should be checked for the specific vehicle application.

Wholesale Supply & OEM/ODM Support

Wholesale enquiries are welcome from automotive parts distributors, importers, and regional aftermarket suppliers. To check availability and fitment, please provide the OE number, estimated quantity, and target vehicle application.

OEM/ODM options and private-label packaging can be discussed according to order quantity and packaging requirements. Product details and sample matching can be reviewed before bulk production to help ensure the selected stabilizer link meets the buyer’s application needs.

FAQ

1. What is BYD 11663979-00?
It is an OE reference for a front stabilizer link assembly used in selected BYD vehicles.

2. Is 11663979-00 the same as SEH-2906100?
Parts catalogues list these numbers as related references for the same stabilizer-link application. Confirm the number against the vehicle or removed part before ordering.

3. Which BYD models may use this stabilizer link?
Selected Han, Tang, Dolphin, and Yuan Plus versions appear in parts catalogues. Exact compatibility depends on the vehicle configuration.

4. What is the approximate length?
Reference listings commonly show approximately 260 mm. Compare the actual dimensions and mounting details when checking a new application.

5. What thread specification is listed?
Some catalogues specify M12 × 1.25. Verify the thread size and pitch against the required part before purchase.